Fencing

Golden Larch Lap Panels

Our strong 4 batton panel complete with capping rail.

These Panels are a great for separating gardens between neighbours because they have the same look from either side, this way neither neighbour has to tolerate an uglier side.

All panels are dip treated for extra longevity

All panels come standard 183cm wide (6ft) you choose the height of the panel only. However we do offer a custom made to measure service on widths & height (contact us for more information)

Premier Larch Lap Fence Panel

The Premier Larch Lap fence panel is constructed right here in our factory. These panels consist of 5 vertical batons giving the panel more strength than most other lap panels. The beauty of a lap panel is that the panel looks the same either side, so neighbours do not have to choose who has the better looking side.

This panel is made using Pressure Treated Tanalised timber

THE HEIGHT MEASUREMENT IS MEASURED TO THE TOP OF THE PANEL ALWAYS.

Ultimate Lap Fence Panel

The Ultimate Panel is a fresh take on a traditional lap panel design. The Ultimate Panel features clean, straight cut horizontal slats that are fitted into a 40mm rebated frame for extra support. The frame is manufactured using neat and sturdy Mortise & Tenon joints unseen on the lap panel market until now.

This panel is available pressure-treated green for a more decorative and premium look.

This Panel is only available in 6ft x 6ft and 6ft x 5ft at the moment

Superior Bow Top Lap Panel

The Superior Bow Top panels give a contemporary twisted to a standard larch lap panel. These panels are constructed using tenon & mortise joints inside a rebated frame. The bow itself is one complete rebated arched piece of timber, giving strength and a sleek finish to this impressive panel.

This panel is made using Pressure Treated Tanalised timber

Call our shop for more info.

Feather Edge Semi Braced Panels

We make all our own Feather Edge Panels on site. All of our Feather Edge panels come fully pressure treated.

Our semi braced panels are perfect for slotting in between concrete posts. Our panels are made from 125mm wide Feather Edge Boards and have a huge chunky backing rails 32mmx 47mm Bracing the panel then finished off with a chunky capping rail.

We also offer a custom making service for those odd size panels you may need please feel free to contact directly to discuss on 01952 502803

All panels come standard 183cm wide (6ft) you choose the height of the panel only. However we do offer a custom made to measure service on widths & height (contact us for more information)

Feather Edge Fully Framed Panels

We make all our own Feather Edge Panels on site. All of our Feather Edge panels come fully pressure treated.

Our Fully Framed Feather Edge Panels are the strongest on the market. Made with 125mm chunky Feather Edge Boards and framed with 32mmx47mm Batons and Topped with a chunky capping rail.

We also offer a custom making service for those odd size panels you may need please feel free to contact directly to discuss on 01952 502803

All panels come standard 183cm wide (6ft) you choose the height of the panel only. However we do offer a custom made to measure service on widths & height (contact us for more information)

Dome Top Feather Edge Semi Braced Panel

We make all our own Feather Edge Panels on site. All of our Feather Edge panels come fully pressure treated.

Our semi braced panels are perfect for slotting in between concrete posts. Our panels are made from 125mm wide Feather Edge Boards and have a huge chunky backing rails 32mmx 50mm Bracing.

We also offer a custom making service for those odd size panels you may need please feel free to contact directly to discuss on 01952 502803

The height is measured from the bottom of the panel to the Shoulder of the panel. The width of the Panel is 183cm (6ft) standard on all panels. However we do offer a made to measure custom service (contact us for further information.

Dome Top Feather Edge Panel Fully Framed & Capped

We make all our own Feather Edge Panels on site. All of our Feather Edge panels come fully pressure treated.

Our Fully framed panels are like no other on the market. Look close at the photos, the rear of the panel is fully framed and braced, but at the top of the panel is a special curved backing rail that sits behind the top of the dome. This allows much needed strength to hold that curve in place unlike semi braced panels that just have a cut board over hanging at the top of the panel. This bracing also allows us to attach a capping rail on top too, for extra protection and to give a great finish. The panels slot in perfect between concrete posts. Our panels are made from 125mm wide Feather Edge Boards and have a backing rails 32mmx 50mm Bracing.

We also offer a custom making service for those odd size panels you may need please feel free to contact directly to discuss on 01952 502803

The height is measured from the bottom of the panel to the Shoulder of the panel. The width of the Panel is 183cm (6ft) standard on all panels. However we do offer a made to measure custom service (contact us for further information.

Ultimate Tongue & Groove Semi Braced Dome Top Fence Panel

These Dome top panels are the next level up from a feather edge panel. These use interlocking Tongue & Groove Boards which are all smooth and planed giving a superior finish to the fence panels and are so much easier to paint/stain when required. The T&G range of panels are by far the strongest panels on the market. We make all our own Tongue & Groove. All of our T&G panels come fully pressure treated.

Our semi braced panels are perfect for slotting in between concrete posts. Our panels are made from 125mm wide T&G Boards and have a smooth planed timber backing rails 32mmx 50mm Bracing.

We also offer a custom making service for those odd size panels you may need please feel free to contact directly to discuss on 01952 502803

The height is measured from the bottom of the panel to the Shoulder of the panel. The width of the Panel is 183cm (6ft) standard on all panels. However we do offer a made to measure custom service (contact us for further information.

Ultimate Tongue & Groove Fully Framed & Capped Dome Top Fence Panel

These Dome top panels are the next level up from a feather edge panel. These use interlocking Tongue & Groove Boards which are all smooth and planed giving a superior finish to the fence panels and are so much easier to paint/stain when required. The T&G range of panels are by far the strongest panels on the market. These ones especially as the top of the panels is not only capped with a rail on the top, it also has a strong specially made curved backing rail which sits behind the top of the curve to give the top of the panel even more strength. We make all our own Tongue & Groove. All of our T&G panels come fully pressure treated.

Our Fully braced panels are perfect for slotting in between concrete posts. Our panels are made from 125mm wide T&G Boards and have a smooth planed timber backing rails 32mmx 50mm Bracing.

We also offer a custom making service for those odd size panels you may need please feel free to contact directly to discuss on 01952 502803

The height is measured from the bottom of the panel to the Shoulder of the panel. The width of the Panel is 183cm (6ft) standard on all panels. However we do offer a made to measure custom service (contact us for further information.

Round Top Picket Fence

This Elite Style product is all made with extreme attention to detail in there finish.

All of our Elite range products come fully pressure treated for a longer lasting lifespan. All Timber used on this range is FSC Approved

All timber used is smooth planed timber. MATCHING GATES AVAILABLE BELOW

Elite Esprite

The Elite European Style products all come with a very contemporary style and feel to them, they are all made with extreme attention to detail in there finish.

All of our Elite European range products come fully pressure treated for a longer lasting lifespan. All Timber used on this range is FSC Approved

Strong yet stylish fence panel

Elite Omega Panels

The Elite European Style products all come with a very contemporary style and feel to them, they are all made with extreme attention to detail in there finish.

All of our Elite European range products come fully pressure treated for a longer lasting lifespan. All Timber used on this range is FSC Approved

Strong yet stylish fence panel made with a Lattice/trellis top to give an added dimension to the panel and allow some extra light to come through the panel.

The height of these panels is measured different to anywhere else that sells these. We measure this product from the bottom of the panel to the shoulder. For example: The 900mm high panel will be 900mm at the shoulder plus extra 200mm on top for the arch.