SECONDS 6ft Feather Edge 90cm Wide Semi-Braced Flat Top Gate

This product is classed as SECONDS. We only class this product as seconds for any of the following reasons: There could be fading of the wood / staining of the wood / small chips or splits / but nothing that will effect the strength or integrity of the item. This product is "new" but has been taken out by quality control for one of the above reasons and we are not able to sell as brand new top quality. Most of the issues are aesthetic and can be fixed once item is painted and then you would never be able to tell.

GRAB A BARGAIN NOW WHILE STOCKS LAST!!

Height: 6ft (180cm High) Tongue & Groove Semi Braced Pathway Flat Top Gate [Width: 90cm Wide | No Latch Kit]

This listing is offering you a Standard Flat Top gate in Feather Edgle Planks, these are semi braced which is a cheaper option of the gate compared to Fully Framed. Semi-Braced gates have bracing top, middle and bottom of the gates as seen in the photos.

Our gates are made with pressure treated (tanalised) timber. The feather edge boards used on the gate are 125mm wide with a 15mm thick edge. The batons we use to brace the gate are 34mm thick by 70mm wide Smooth Planed Sawn timber. Our gates are nailed using professional nail guns and galvanised nails making them extremely long lasting. All timber used on this gate is Pressure treated (tanalised) giving the gate immediate protection from the elements, therefore it does not require any further treatment.

• Height: 6ft (180cm) x Width: 90cm


• The feather edge boards used on the gate are 125mm wide with a 15mm thick edge each overlapping to form a closedboard effect.


• We use 34mm by 70mm smooth planed timber to brace the gate providing a versatile and lighter frame.


• Our gates are nailed using professional nail guns using galvanised nails making them extremely long-lasting.


• All timber used to build this gate are pressure treated and the gate is well manufactured, to ensure that they survive many years to come.


• Classed as SECONDS. A small scuff somewhere or a small chip out of the frame of gate. There could be staining / fading issues. The instructual integraty of the gate has not been compromised. (see listing photos for these issues)