Wooden Fence Post Caps Capping Protection for [3x3" (75x75mm) | 3x4" (75x100mm) | 4x4" (100x100mm)] These are Pressure Treated, Tanalised and offer an over hang on these Posts giving better Protection
Pressure Treated Tanalised Post Caps. The wood used to create these high-quality timber fence post caps are cut from slow-grown European timber which is then pressure treated to provide a longer-lasting lifespan. The cap is 25mm high and has an approximate 10mm lip on each edge. Designed to protect your wooden posts from water and decay ingress at the top of your posts. Not only do they protect the top of your posts from rot but they're also a great finishing touch to your posts, completing your job!
Our post cap range are compatible with 3x3" (75x75mm), 3x4" (75x100mm) and 4x4" (100x100mm) Posts.
3x4" Post Caps are measured at 95mm x 120mm.
3x3" Post Caps are measured at 100mm x 100mm.
4x4" Post Caps are measured at 120mm x 120mm.
Each Postcap is oversized by approximately 10mm to create a lip around the post.
Pressure-treated timber for a long lifespan.
Can be either nailed or screwed into place.
Fixings not included.
Easy to install.
Our wood products are all pressure treated using Tanalith E, green flecks may appear within the wood but will fade over time as the products weather.
Please note: timber will always contract and expand in different weather conditions, some dimensional variation should be expected.
We recommend not painting the products for up to 6-8 weeks to allow the treatment to completely dry.