Concave Top Square Standard Trellis Panels

Premier Garden Standard Trellis Panels 120mm Squares Concave Design Width: 6ft (183cm) x Optional Shoulder Heights: 1ft (30cm), 2ft (60cm), 3ft (90cm), 4ft (120cm), 5ft (150cm) or 6ft (180cm)

• Product Dimensions: Width: 6ft (183cm) x Optional Heights: 1ft (30cm), 2ft (60cm), 3ft (90cm), 4ft (120cm), 5ft (150cm) or 6ft (180cm).
• The trellis laths used on this product are rough-sawn 32mm x 16mm. The front battens are positioned horizontally along with the rear battens which are positioned vertically.
• The great thing about our Concave trellis panels is our measurements are to the shoulders so the advertised height is minus 20cm for the top of the concave. When we say the height is 1ft (30cm) this is to the top corner (shoulder) the height to the top of the concave is approximately 10cm.
• With the standard design we position the laths to provide squares between 100mm to 120mm in size the squares differ depending on the height purchased.
• Hand made in our Shropshire UK factory by one of our expert joiners.
• Our trellis panels can be used in several ways, supporting climbing plants, such as Sweet Peas, Honeysuckle or Clematis as there is plenty of room for the plants to grow and weave between each batten.
• Fence panel topper, can be attached to a traditional 6ft wide fence panel to add more height to your garden for extra privacy or visual effect.
• Create a unique wave effect when this product is paired with our Arched Trellis Panels.
• Our wood products are all pressure treated using Tanalith E, green flecks may appear within the wood but will fade over time as the products weather.
• Please note: timber will always contract and expand in different weather conditions, some dimensional variation should be expected.
• We recommend not painting the products for up to 6-8 weeks to allow the treatment to completely dry.